Reduced Input
*Node and *Element Cards are removed.
*KEYWORD
*TITLE
Two Plates
$
$ - two plates, one on top of the other with an overlap
$ - material is some type of aluminum (I believe)
$ - contact is defined (auto single surface)
$ - modified from the plate model of 1995
$ * refined mesh
$ * documentation cleaned-up
$ * re-organized
$ * non-essentials removed
$ * 1 cross section defined through each plate
$ * fully integrated shell formulation (elform = 16)
$
$ J.D. Reid 2/1/00
$
$ Units: mm, kg, ms, kN, GPa, kN-mm
$
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$
$$$$ Control Ouput
$
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$
$...>....1....>....2....>....3....>....4....>....5....>....6....>....7....>....8
$
*CONTROL_TERMINATION
$ endtim endcyc dtmin endneg endmas
8.00
$
*CONTROL_ENERGY
$ hgen rwen slnten rylen
2 2 2
$
*CONTROL_OUTPUT
$ npopt neecho nrefup iaccop opifs ipnint ikedit
1 3
$
*CONTROL_SHELL
$ wrpang itrist irnxx istupd theory bwc miter
1
$
*DATABASE_BINARY_D3PLOT
$ dt lcdt
0.2
$
*DATABASE_BINARY_D3THDT
$ dt lcdt
99999
$
*DATABASE_GLSTAT
$ dt
0.010
$
*DATABASE_MATSUM
$ dt
0.010
$
*DATABASE_NODOUT
$ dt
0.010
$
*DATABASE_HISTORY_NODE
$
$ 1022 - weld location on plate 1
$ 2032 - center, right end (max X) of plate 2
$
$ id1 id2 id3 id4 id5 id6 id7 id8
1022 2032
$
*DATABASE_SWFORC
$ dt
0.010
$
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$
$$$$ Define Cross Sections
$
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$
$...>....1....>....2....>....3....>....4....>....5....>....6....>....7....>....8
$
$$$$ Make two cross section cuts, one through each plate.
$
*DATABASE_SECFORC
$ dt
0.010
$
$
*DATABASE_CROSS_SECTION_PLANE
$ psid xct yct zct xch ych zch
1 28.0 0.0 0.0 100.0 0.0 0.0
$ xhev yhev xhev lenl lenm
28.0 1.0 0.0
$
*DATABASE_CROSS_SECTION_PLANE
$ psid xct yct zct xch ych zch
2 92.0 0.0 0.0 100.0 0.0 0.0
$ xhev yhev xhev lenl lenm
92.0 1.0 0.0
$
$
*SET_PART_LIST
$ sid
1
$ pid1 pid2 pid3 pid4 pid5 pid6 pid7 pid8
1
$
*SET_PART_LIST
$ sid
2
$ pid1 pid2 pid3 pid4 pid5 pid6 pid7 pid8
2
$
$
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$
$$$$ Define Contacts
$
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$
$...>....1....>....2....>....3....>....4....>....5....>....6....>....7....>....8
$
*CONTACT_AUTOMATIC_SINGLE_SURFACE
$ ssid msid sstyp mstyp sboxid mboxid spr mpr
0
$
$ fs fd dc vc vdc penchk bt dt
$
$ sfs sfm sst mst sfst sfmt fsf vsf
$
$
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$
$$$$ Define Parts and Materials
$
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$
$...>....1....>....2....>....3....>....4....>....5....>....6....>....7....>....8
$
*PART
$ pid sid mid eosid hgid grav adpopt tmid
plate_1
1 1 1
plate_2
2 1 1
$
*MAT_PLASTIC_KINEMATIC
$ mid ro e pr sigy etan beta
1 2.70e-6 68.9 0.330 0.286 0.00689
$
$ src srp fs
$
$
*SECTION_SHELL
$
$ sid elform shrf nip propt qr/irid icomp
1 16 5.0
$
$ t1 t2 t3 t4 nloc
2.0 2.0 2.0 2.0
$
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$
$$$$ Define Nodes and Elements
$
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$
$...>....1....>....2....>....3....>....4....>....5....>....6....>....7....>....8
$
*END