Overview

The loadcases are described in detail in the manual included in the download package.

1. Skew Plate with Normal Pressure (thin shell mesh)
2. Skew Plate with Normal Pressure (thick shell mesh)
3. Elliptical Thick Plate under Normal Pressure (coarse mesh)
4. Elliptical Thick Plate under Normal Pressure (fine mesh)
5. Snap-Back under Displacement Control
6. Straight Cantilever Beam with Axial End Point Load
7. Lee's Frame buckling Problem
8. Pin-Ended Double Cross: In-Plane Vibration
9. Simply Supported Thin Annular Plate (coarse mesh)
10. Simply Supported Thin Annular Plate (fine mesh)
11. Transient Response to a Constant Force
12. Simply Supported Square Plate: Out-of-Plane Vibration (solid mesh)
13. Simply Supported Square Plate: Out-of-Plane Vibration (thick shell mesh)
14. Simply Supported Square Plate: Transient Forced Vibration (solid mesh)
15. Simply Supported Square Plate: Transient Forced Vibration (thick shell mesh)
16. Transient Response of a Cylindrical Disk Impacting a Deformable Surface
17. Natural Frequency of a Linear Spring-Mass System
18. Natural Frequency of a Nonlinear Spring-Mass System
19. Buckling of a Thin Walled Cylinder Under Compression
20. Membrane with a Hot Spot
21. 1D Heat Transfer with Radiation
22. 1D Transient Heat Transfer in a Bar
23. 2D Heat Transfer with Convection
24. 3D Thermal Load
25. Cooling of a Billet via Radiation
26. Pipe Whip
27. Copper Bar Impacting a Rigid Wall